Nav noliktavā. Jautājiet piegādes laiku
High quality spray for fast and easy removal of dried adhesives and seals, as well as hardened sealing
materials in cars and machine parts.
APPLICATIONS:
Cylinder heads
Gear boxes
Exhausts
Crankcases
Sanitary fittings
Water and oil pumps
Electro engines
PRODUCT CHARACTERISTICS:
User friendly
High dissolving properties
Optimum effect in view of high viscosity
Non-conductive
Slight gel structure
Non-corrosive
Directed jet spray
360° valve
TECHNICAL INFORMATION:
Contents500 ml
BasisDimethoxymethane
VOC-contentApproximately 95% w/w
Colour Transparent
Scent Ether
Relative density @20°C0,75 g/ml
Yield 1,0 – 1,5 g/sec
Vapour pressure @20°C2 to 3 bar
pH-value Neutral
DIRECTIONS FOR USE:
Before use, carefully read the directions on thepackaging.
Valvoline™ Gasket Remover should be at room temperature before use. The processing
temperature should be between 5 to 30°C. Shake before use.
Cover lacquered and plastic parts Apply Valvoline™ Gasket Remover in an equal layer on the parts to be treated and allow to take effect for approx. 10 minutes.
Carefully remove the dissolved residues with a filling-knife.
With persistent contamination, repeat the treatment.
materials in cars and machine parts.
APPLICATIONS:
Cylinder heads
Gear boxes
Exhausts
Crankcases
Sanitary fittings
Water and oil pumps
Electro engines
PRODUCT CHARACTERISTICS:
User friendly
High dissolving properties
Optimum effect in view of high viscosity
Non-conductive
Slight gel structure
Non-corrosive
Directed jet spray
360° valve
TECHNICAL INFORMATION:
Contents500 ml
BasisDimethoxymethane
VOC-contentApproximately 95% w/w
Colour Transparent
Scent Ether
Relative density @20°C0,75 g/ml
Yield 1,0 – 1,5 g/sec
Vapour pressure @20°C2 to 3 bar
pH-value Neutral
DIRECTIONS FOR USE:
Before use, carefully read the directions on thepackaging.
Valvoline™ Gasket Remover should be at room temperature before use. The processing
temperature should be between 5 to 30°C. Shake before use.
Cover lacquered and plastic parts Apply Valvoline™ Gasket Remover in an equal layer on the parts to be treated and allow to take effect for approx. 10 minutes.
Carefully remove the dissolved residues with a filling-knife.
With persistent contamination, repeat the treatment.
