JAUNUMS!
Pievienojies!
No 01.04. darbu 6dienās atsāk Stokker centri Rīgā, Krasta ielā, Jelgavā, Liepājā un Valmierā.
Open MenuProduktu katalogs0Open CartOpen Search
search
Iestatījumi
Vietne (valsts)
Piegādes valsts
valoda
0
Jūsu pirkumu grozs ir tukšsPievienojiet grozam produktus vai
dodieties uz sākumlapu
Bezmaksas piegāde
interneta veikala pasūtījumiem uz pakomātiem no 49€
Mans Stokker
Kļūt par klientu
searchMeklēt
Kombinētais perforators KHE 5-40, Metabo

Kombinētais perforators KHE 5-40, Metabo

Produkta kods: 600391500&MET   MPN: 600391500   GTIN: 4061792199255   , B
Rated input power: 1.100 W
Maximum impact rate: 3.000 /min
Max. single blow energy (EPTA): 8,5 J
Bit retainer: SDS-max
Drill diameter in:
- Concrete with hammer drills: 40 mm
Weight (without power cable): 7,1 kg
Cable length: 6 m

Combination hammer with 2 functions: hammer drilling and chiselling
Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
Easily accessible locking switch for chiselling in continuous mode
Vario-Constamatic (VC)-Full wave electronics for working at customised speeds to suit the application materials, and speeds that remain almost constant even under load
Thumbwheel for preselection of the speed and impact rate
Electronic soft start for precise spot-drilling
Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
Restart protection: prevents unintentional start-up after power supply interruption
Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
Wear Indication for Carbon Brush
Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
Early warning system thanks to service LED for targeted planning of the carbon brush replacement 8 working hours before switching off

Scope of delivery
Side handle, Drilling depth guide, Lubricant for tool shank end, Duster, Plastic carry case


Izlasiet pilnu aprakstu →
479.00 €
vai Maksājiet vēlāk ➂ daļās, 0% procenti
StokkerPRO klienta cena ar uzkrātiem bonusa punktiem. 240.00 +239 punkti
pievienot grozam
Noliktavā 1 gab. , skatīt pieejamību →
← Atgriezties
Maksājiet vēlāk ➂ daļās, 0% procenti
1.Maksājiet līdz
01.05.2023
159.67 €
2.Maksājiet līdz
01.06.2023
159.67 €
3.Maksājiet līdz
01.07.2023
159.67 €
Mēs nosūtīsim jūs uz nākamo lapu, lai aizpildītu datus.
  • Apraksts
  • Informācija par produktu
  • Pieejamība
  • Rated input power: 1.100 W
    Maximum impact rate: 3.000 /min
    Max. single blow energy (EPTA): 8,5 J
    Bit retainer: SDS-max
    Drill diameter in:
    - Concrete with hammer drills: 40 mm
    Weight (without power cable): 7,1 kg
    Cable length: 6 m

    Combination hammer with 2 functions: hammer drilling and chiselling
    Metabo VibraTech (MVT): integrated damping system to reduce vibrations in order to protect the user's health
    Easily accessible locking switch for chiselling in continuous mode
    Vario-Constamatic (VC)-Full wave electronics for working at customised speeds to suit the application materials, and speeds that remain almost constant even under load
    Thumbwheel for preselection of the speed and impact rate
    Electronic soft start for precise spot-drilling
    Optimum heat dissipation and low weight thanks to die cast magnesium gear housing
    Metabo S-automatic safety clutch: mechanical decoupling of the drive for safe working should the drill stop unexpectedly
    Restart protection: prevents unintentional start-up after power supply interruption
    Low-dust chiselling and drilling with external dust extraction ESA max (accessories)
    Wear Indication for Carbon Brush
    Service display, e.g. to indicate when the carbon brush needs to be replaced, and an LED indicating mains voltage
    Early warning system thanks to service LED for targeted planning of the carbon brush replacement 8 working hours before switching off

    Scope of delivery
    Side handle, Drilling depth guide, Lubricant for tool shank end, Duster, Plastic carry case


    Attēliem ir ilustratīva nozīme.
  • Svars7.1 kg
    Mērvienībagab.
    GTIN4061792199255
    Produkta kods600391500&MET
    MPN600391500
  • Stokker Jelgava, Ziediņu ceļš 3C1 gab.
    Centrālā noliktava Igaunijā0 gab.
  • Informācija par piegādi
 

Līdzīgi produkti

 
Stokker ir vadošais augstas kvalitātes instrumentu un tehnikas tirdzniecības un servisa pakalpojumu uzņēmums Baltijā.
 
  • Klientu atbalsta serviss Pi-Pk 8.00-17.00
 
 
 
 
Piesakies jaunumu saņemšanai e-pastā un uzzini pirmais par īpašajiem piedāvājumiem. Ikmēneša ziņas, ieteikumi un atgādinājumi tavā e-pastā
 
 
Vai Jūs zinājāt, ka 92 no 100 Stokker klientiem mūs ieteiktu saviem draugiem vai kolēģiem?
Ära vajuta
Mans Stokker
E-pasts
SmartID
Facebook/Google
Mainīt vai atjaunot paroli?

Pieslēgties ar SmartID

Ja lietojat Smart-ID "Basic" kontu, reģistrācija StokkerPRO Bonuss programmai nebūs iespējama. Nepieciešams izveidot pilno Smart-ID kontu, izmantojot e-ID karti vai bankas filiālē, lai veiktu personas identitātes apliecināšanu.

  • Ja esat Stokker klients, bet e-veikalu izmantojat pirmo reizi
  • izveidojat paroli , lai ienāktu sistēmā.

Vēl neesi Stokker klients? Ieskaties šeit un reģistrējies →Reģistrējies StokkerPRO un pelni ar pirkumiem.
SIA Stokker, izmanto sīkdatnes, lai sniegtu jums pielāgotu informāciju par precēm un pakalpojumiem, kā arī uzlabotu mūsu pakalpojumus un tīmekļa vietnes darbību. Ja piekrītat sīkdatņu izmantošanai, lūdzu, nospiediet "Apstiprināt visas". Ja vēlaties mainīt savu izvēli, lūdzu, nospiediet “Pārvaldīt iestatījumus”.
Pārvaldīt iestatījumus
Apstiprināt visas