Fertilizer spreader DSX1875

Optimal spreading of fertiliser means using exact amounts of nutrition and avoiding overlap. Different fertilisers have a mix of different granular sizes, which is influencing the spreading pattern and the maximum possible spreading width. The flow rate will depend very much on the fertiliser properties (granules size, shape and weight) and will change with increasing or decreasing the humidity. The ideal fertilizer has 80% of the granules in the size range 2- 4,75 mm - then wider working width, than bigger granular size should dominate. But not over 4,75 mm, as too big granules may damage the crop. A good blend needs granules with similar specific weights and similar sizes. Kubota spreaders discs have 8 large spreading vanes, which allow most accurate spreading pattern and reduce wearing of vanes. RotaFlow system: central release point, smooth acceleration and centrifugal force accelerates fertilizer up to disc speed before it reaches the vane: no fragmentation, no dust. Flat discs, horisontal spreading pattern - minimal wind influence, maximum tolerance. Guaranteed accuracy on slopes. Pictures are illustrative and for non-contractual use

FlowPilot - easy setting and adjustment on each disc Border Spreading with hydraulic border spreading plate or TrimFlow system Stainless steel front plates Fine application kit Overload clutch Stainless steel hose connections 2 High capacity & robust sieves Tool to open the sieves Inclinometer Grading box to test the fertiliser quality Open/close indicator Top and bottom hopper windows Low speed agitator (15%) LED lighting set

Hopper capacity: 1875l Hopper extension 675l, in total 2550l Filling height: 120cm Total width: 290cm Filling width: 284cm Empty weight: 530kg Spreading width: 12-54m, over 45m only with optional vane set Output: 10-320kg/min Optional equipment (included in price): Reflector set Righthand flow limiter TrimFlow/ExactLine RH Left/right separate closing 2DA valve Hopper extension 675l Border spreading indicator device with 3 LED indicators for non-isobus compatible machines Manufactured in Netherland Kverneland Nieuw-Vennep factory Warranty 2 years